icon 字幕
正在載入字幕...

Hand Held Shower Installation -- Waterpik™ Twin Turbo

youtube 翻譯 youtube 中文翻譯 youtube 字幕 youtube 中文字幕 youtube 翻譯成中文 youtube 視頻翻譯 youtube translate to chinese translate youtube to chinese youtube transcript to chinese translate youtube video to chinese

YouTube transcript, YouTube translate

29/32

A quick preview of the first subtitles so you know what the video covers.

Welcome to the Waterpik shower head installation video. Replacing your shower head is so easy anyone can do it and it takes just a few minutes. Some tools you may need for installation are adjustable pliers and a cloth rag. The first step is to remove the old shower head. To make sure you don't scratch the fixture, cover the pliers with the cloth rag. Use the pliers to remove the existing shower head from the pipe by unscrewing in a counterclockwise direction. Once removed, set the shower head aside. Before you install the new shower head, you should first remove any old Teflon tape or plumbers's putty. Unpack your handheld shower head and components. Locate the shower bracket and find the threaded connection. Make sure the rubber washer is in place. Thread the bracket onto the pipe in a clockwise direction and tighten by hand. Place the rag over the pivot ball connection to protect from scratching the product. Tighten the connection securely with the pliers, but do not overtighten. Once the connection is snug, loosen the large bracket nut and rotate the front of the bracket to the desired position. When positioned correctly, rettighten the nut. Locate the shower hose and check the connections to make sure the rubber washers are present. Locate the hose end that connects to the bracket by checking the labeling. If there is no labeling on your hose, then either end should work. Connect the correct hose end to the bracket by turning clockwise. Run your hand down the hose to unfurl any twists. Then connect the other end of the hose to the shower by turning in a clockwise direction. Place the shower head into the bracket in the preferred position. Turn on the water all the way and test all connections for leakage. If leaks appear at any of the connections, shut off the water, tighten the connection, and retest. If no leaks are visible, you are ready to enjoy your Waterpik shower head. It takes just minutes to power up your daily shower experience. If you have further questions, visit our customer service page at waterpick.com. [Music]

設定

100%

翻譯目標語言

🔊 音訊播放
正在播放翻譯音訊