Cómo conectar la máquina Syntec a su computadora

uh before before we download the simulation software you just press system add me and then press uh about system press about then here for example this machine the variant is uh 50v so when you download the simulation software from IDE you must find this this model it must be SE with your Machine controller okay this is the second thing we need to we need to check after that after we download everything you press uh maintain and then press f2 here is uh the IP for the uh control controller for example now for this machine is uh 192.168.1.1 so I need to set the I need to set the computer IP computer IP must be uh one point I set the computer IP to [Music] be 1 192.168.1 this must be SE for the next one the last number you can now I set it to be 100 so you can you can set it to be two three any number except one the must be different with the controller so this is the second thing we need to to check you just press set F5 set kernel sere press this one and then you and press F1 start sever then press okay press that sever then press okay after that for all all these things we we have finished setting on the controller then we need to set on the computer we just uh so on the computer because we have uh you know we have uh coped ocis to be this folder okay so after that we just go find the open CC and uh this one and send send to the desktop so after that we got this this one you just uh switch double click this this one and now because I have connected successfully