How to Permanently Mount Starlink On RV Roof (No Drilling Needed) | Step-by-Step DIY Install

Hi everybody, welcome back to Travel Reimagine . This is Chase and Jacqueline here . Today we are going to be doing a very special video about mounting your Starlink . So our problem right now is we use the flag pole system which is a great system and it does work wonderfully . We've been using it for over a year and a half . However, it's one extra step on travel day . We have to get the flag pole out . We have got to put the mount on it, stick it on the wall with a suction cup . Chase has to run wires . It's just an additional step we'd really like to eliminate , especially because we are doing overnight stays at truck stops and places where we would really like to have internet but don't want to have to set the whole thing up . So today, Chase will be walking you through step by step on how to mount it on the roof . This will include how to do the wiring and how to actually attach the Starlink onto the mount on the roof , cleaning it, and all the other pieces this will entail . We will also show you where we are rolling our wires into the wall so you guys can do this at home . So stay tuned, and we hope you guys enjoy the video . All right, so step one is to take the wire, our rat's nest here , uh we're going to be running it from the basement up to the roof . Now, for people who are have their router down below , you actually can probably make your life easier and run it down from the roof to . Our router is already run. . So, we're only working with the back half . So, we actually have to go up to the roof and pull the wire up , but it'll be the same process for anyone . Okay. . So, your first step in running the wire is to locate which pipe you're going to be pulling the cord . So, on top of our G3950, we've got three pipes here . We got two white ones and one black one