Cómo realizar el cableado básico de las luces direccionales y de emergencia de un auto, parte 1

hello hello dear viewers Welcome to our channel it's very good to have you here in today's video we are going to have a look at how to construct Hazard wiring signal and a turn signal we will be demonstrating by using this combination switch here we have the turn signal switch this is the turn signal switch this is turn left and turn right and also here right here we have a hazard switch here we have the hazard switch when you look at the Lower Side these green wires they belong to the hazard and the turn signal now in order to identify the terminals first let's mark these lines let's identify put them on a paper and then by using the different switch positions and Hazard switch positions then we can identify which wire belongs to which line so we have multiple lines lines coming from the battery line coming from the ignition switch line coming from the and line going to the left and right turn signal lights so in order to identify that first let's use the color code and prepare a chart it's always a good idea to prepare a chart so that you can identify the different wires now in order to identify there are six lines here let's draw some color by color and we have four switch positions now in order to construct that let's draw a table you can always use this method if you are not sure about the color coding which terminal belongs to which this is the best method to go about it now let's put the different switch positions in one side and the color coding of these cables on