INITIAL MIKROTIK ROUTERBOARD SETTINGS

Let's go, everyone. In today's lesson, I will teach you how to configure this hAP lite, which is a MikroTik model 750. This MikroTik has five ports, you can see: 1, 2, 3, 4, and 5. And we have several configurations we can do on this RouterBOARD, this MikroTik. We can set it up completely in bridge mode, where it will function as a switch, or we can work with it as a router, where it will handle our network routing. If you set it to bridge mode, you will lose all these features. So, I suggest configuring it as a router, okay? And here, we will receive our internet cable on port one. So, we will authenticate the internet on port one, and port five will be the port for our local network. For those doing the practical evaluation, you know we have the MikroTik on the edge. Configure this RouterBOARD, your MikroTik, and that's what we're going to do now. I'll show you here; I already have the cable receiving our link here. This is the cable we are receiving our internet link from. So, what I'm going to do, I only have one hand here, I'll try to see if I can place it here. I'll show you in a moment. We will receive it on port one; it should light up, see? And on port five, I already grabbed another small cable that is already connected to my notebook. I'll take the other end of it, which is here. This cable is connected to my notebook, and I'm going to plug it into port five. This is the connection so you can immediately get internet on it and configure it through port five, alright? So, place it next to you so you can follow along. So, let's go, so you can see how easy it is. There, on our...